 |
 |  |  |  |  |
 |  |  |
- Share the positive experience of our cooperation and recommend us to your friends and acquaintances:
Penetrating Red belongs to the Ink range, which AK marks with a light blue circle. Inks are very thin and flow into recesses on their own, so one pass shades a whole area of detail without brushing every shadow by hand.
Specifications
| Range | Ink |
| Colour family | Red |
| Type | water-based acrylic |
| Finish | matt |
| Packaging | dropper bottle |
| Manufacturer code | AK11227 |
| EAN | — |
| Manufacturer | AK Interactive |
| Country of origin | Spain |
What it is for in figure painting
- Shading red areas – folds of cloth, cloaks and tunics.
- Picking out detail – the ink runs into grooves and seams by itself.
- Skin glazes – flush and wounds when thinned well down.
- Tinting metal – a warm red cast on rust and blades.
What to pair it with
Apply over finished, dry paint. Combine with Sooty Black for deeper shadows and with Clear Red for stronger colour glazes.
Frequently asked questions
How is an ink different from ordinary paint?
An ink is far thinner and more transparent – it does not build a layer but tints the surface and pulls into recesses. For shading it is much faster than brushing each shadow.
When should I not use an ink?
On large smooth surfaces – it dries unevenly and leaves tidemarks. There a conventional glaze, built up gradually, works better.
How do I thin it?
With water or an AK thinner. A few drops are enough for brush work; airbrushing needs more – AK thinners and cleaners are made for that. With acrylics, two thin coats always beat one thick one.
Is the finish really matt?
Yes, the 3rd Generation range dries matt. To protect the figure or even out the sheen, seal it with a matt varnish at the end.
The full range is in the AK 3rd Generation category.