 |
 |  |  |  |  |
 |  |  |
- Share the positive experience of our cooperation and recommend us to your friends and acquaintances:
Rust does not run evenly down a surface – it seeps from specific points and leaves narrow ginger trails behind it. This enamel is made for those: a red-brown shade applied like any other streak and blended out with white spirit. It works best where rust is logical – around rivets and bolts, under damaged paint, at panel edges and near the exhaust. On a model meant only to look dusty it has no place; rust always needs a source. Shake thoroughly before use. The bottle holds 35 ml.
Specifications
| Code | AK013 |
| Type | enamel effect |
| Material | enamel paint |
| Size | 35 ml |
| Pack | 1 bottle |
| Weight | 0.05 kg |
What it is for
- Weathering vehicles and machinery
- Soiling and ageing a surface
- Layered work alongside pigments
- Dioramas and bases with vehicles
What to pair it with
It is blended with white spirit, which this work cannot do without. Lay matt varnish before the enamel layer and finish the surface afterwards with pigments.
Frequently asked questions
Why is enamel applied over varnish?
The varnish separates the enamel layer from the acrylic beneath. That lets the effect be blended or wiped off entirely with white spirit without harming the paint – which is the whole point of working in enamels.
How long should the effect set before blending?
About ten minutes. Too soon and it wipes away, too late and it will not move. Warmth shortens the window, so on a larger model work section by section.
Does the enamel need thinning?
Not for ordinary application – it goes on straight from the bottle. For a subtler effect thin it with white spirit: the thinner it is, the more delicate the result and the more layers can be built up.