![]() |
![]() | ![]() | |||
A three-millimetre magnet fits in the foot of a figure, in a base and in a turret-to-hull joint – and holds surprisingly well for its size. N52 is the strongest neodymium grade in general supply, so a pair of these will hold a metal figure even while a box is being carried. The commonest use is mounting a figure to its base so that it can be taken apart for painting or transport, and swappable parts – one figure, several weapons or heads. They are handy in assembly too: a magnet holds a part in place while the glue sets.
| Code | AK9132 |
| Type | neodymium magnets |
| Material | N52 neodymium |
| Size | 3 × 1 mm |
| Pack | pack of magnets |
| Weight | 0.02 kg |
Magnets are fixed with cyanoacrylate – its excess comes off with Eraser Cleaner; the plastic parts around them go together with Plastic Cement. Parts are held while drying by the AK9127 metal clips, and the base is built from AK textures.
How do I fit a magnet without getting the poles wrong?
Glue one in first and let the second be pulled onto it – that way the polarity is never wrong. Mark the top face with a pen before gluing. Once it has cured there is no fixing it short of drilling it out.
What glue for magnets?
Cyanoacrylate. Plastic cement will not hold metal, because it works by attacking the plastic chemically. Drill the hole to a close fit so the magnet does not sit crooked, and use very little glue – excess would push it proud of the surface.
Will it hold a metal figure?
A pair will, even a fairly large metal figure. For very heavy busts it is better to use more magnets or a larger diameter – N52 is the strongest grade, but 3 mm is still a small contact area.