Rage Resin Models is the range with which AK Interactive entered the world of fantasy figures for wargames. It is built on the sculpts of Raul Garcia Latorre and his brand Enigma – his classic figures, now cast in resin by master Verdier. Ulgren is a 35 mm figure from that range. Resin differs from plastic in one practical respect: it cannot be joined with plastic cement, which works by dissolving the surface. Resin wants cyanoacrylate, and for heavier parts a wire pin as well – the joint then holds mechanically rather than on contact area alone.
| Code | RAGE022 |
| Scale | 35 mm |
| Material | resin |
| Range | Rage Resin Models |
| Sculptor | Raul Garcia Latorre |
Resin needs a primer – paint will not hold without one. Painting is done with AK 3rd Generation acrylics or Ionic Smart Colors, and brushes are in the da Vinci category. The base is finished with AK textures and vegetation.
Can resin be joined with plastic cement?
No. Capillary plastic cement dissolves polystyrene and has no effect on resin. Cyanoacrylate is used instead, with an accelerator if needed.
When is pinning worth it?
Whenever a part is heavy or has a small contact area – an arm holding a weapon, a head, a cloak. A length of thin wire and a pin vice are all it takes.
Does it come painted?
No, it is supplied unpainted and without a base.